DVS Micro LCT FCSII - Blue
FREE SHIPPING WHEN TOTAL SPEND IS OVER $50
“The Micro has a round nose, pointed round tail combination outline and is flat rockered with a touch of extra tail lift. The bottom configuration is a single concave up front into a double concave Vee with a thruster fin set up. The fuller outline and flat rocker makes catching waves easy and the “Micro” is like a flying sled that fire up in just about all conditions.”
DVS5'8 x 20 1/2 x 2 3/4 (36.23L)
5'10 x 20 1/2 x 2 3/4 (37.47L)
6'0 x 20 1/2 x 2 3/4 (38.76L)
6'2 x 20 1/2 x 2 3/4 (40.09L)
6'4 x 20 1/2 x 2 3/4 (41.42L)
6'6 x 21 x 2 3/4 (43.77L)
6'8 x 21 x 2 3/4 (45.15L)
6'10 x 21 x 3 (50.31L)
7'0 x 21 x 3 (51.84L)
The Carbon Fibre placed along the centre of the deck acts in a similar way to a leaf spring providing storage of potential energy during bottom turns with a progressive release resulting in a smooth transition during top turns
Epoxy Resin is a healthier alternative to polyester as epoxy emits 50-75% fewer VOCs (volatile organic compounds) than polyester resin, which means a decrease in harmful chemicals in the shop and the environment in general. In fact, epoxy is a common household item, safe to use without a mask and with only moderate ventilation. Epoxy is lighter than polyester. Under most circumstances, resin makes up a large part of a completed board’s overall weight. Not only is epoxy lighter than polyester, but less is needed per coat. This ends up meaning a lighter surfboard – a big plus for most surfers. The biggest bonus However is the durability and strength of epoxy resin.
We recommend that when purchasing a board in LCT Technology to stay within your familiar volume i.e. if you were looking at purchasing a PU board at 40litres then you would also look at purchasing an LCT at 40litres as the displacement will be the same.
**please note board comes with different fin plugs to what is shown in photo